Sanwa Hydrotech Corporation develops, manufactures and sells process pumps including metallic seal-less magnet drive pumps, multi functional pumps for slurry application.
Stainless steel magnet drive pumps
Standard of the seal-less pumpsMedium-sized standard
centrifugal pumps
[MH for high temperature liquids]
![Standard of the seal-less pumps Medium-sized standard centrifugal pumps[MH for high temperature liquids]](../../imgs/p_MH_l.jpg)
The type MP, which is positioned as the core model of MAGPAC® series realize significant reduction in the total cost (life cycle cost) in addition to their three outstanding features, seal-less, high reliability and maintenance-free.
Covers a wide performance range up to 7.5kW and used in a variety applications.
These pumps offer the same high efficiency as mechanical seal pumps. Super-lubricating and super-low wear SiC-D bearings support the magnet drive securely thus result in maintenance free. In addition, they can transfer high temperature (MH) and low temperature (ML) liquid. Select the pump model that matches your requirements. All the three models (MP, MH, ML) can transfer liquid below freezing.
- Fin type frame adapter dissipates heat away from pump.
- Rare earth SmCo magnets are used.
- High temperature gasket material is used.
Specifications
Product specification
| Pump Type | MP | MH | ML | |||
|---|---|---|---|---|---|---|
| Frequency（Hz） | 50 | 60 | 50 | 60 | 50 | 60 |
| Maximum total head（m） | 54 | 68 | 54 | 68 | 54 | 68 |
| Max. capacity （L/min） |
650 | 700 | 650 | 700 | 650 | 700 |
| Maximum operating temperature（℃） | 150 | 280 | 150 | |||
| Minimum operating temperature（℃） | -30 | -30 | -80 | |||
| Liquid maximum specific gravity | 2 | 2 | ||||
| Liquid maximum viscosity （mPa・s,cP） |
300 | 300 | ||||
| Design pressure（MPaG） | 1.0 | 1.0 | ||||
| Bore [Suction x Discharge]（mm） |
25×20 to 80×40 | 25×20 to 80×40 | ||||
| Flange standard | JIS 10K RF ASME 150LB RF |
JIS 10K RF ASME 150LB RF |
||||
| Impeller type | Close | Close | ||||
| Motor output | 0.75 to 7.5kW | 0.75 to 7.5kW | ||||
| (Synchronized) rotation speed（rpm） | 3000/3600 | 3000/3600 | ||||
| Pump material | SCS13(SUS304) SCS14(SUS316) ALLOY20 Hastelloy C equivalent |
SCS13(SUS304) SCS14(SUS316) ALLOY20 Hastelloy C equivalent |
||||
Selection table
* The performance curves of the MH and ML models are identical to that of the MP model.
Example of applicable liquid
| Acrylic acid | Chlorosulfonic acid | Butadiene |
| Acetaldehyde | Hot oil, Hot water | Fluorinert |
| Acetone | Acetic acid | Freon |
| Ammoniacal liquor | Phosphorus trichloride | Hexane |
| Isopropyl alcohol （IPA） |
Ethylene oxide | Hexamethyl diisocyanate （HDI） |
| Ethanol | Cyclohexane | Benzene |
| Ethylene glycol | Pure water | Formalin |
| Oxy phosphorus chloride | Styrene | Maleic acid |
| Octanol | Hydrocarbon | Methanol |
| Hydrogen peroxide water | Trichloroethylene | Methyl ethyl ketone |
| Caustic soda | Toluene | Sulfuric acid |
| Xylene | Kerosene | Various chemicals |
| Glycine soda | Oleum Fuming sulfuric acid | Various heat media liquid |
| Chloroform (TrichloroMethane) |
Phenol | Various coolant liquid |
For more details about our products and service, please fill in the form below and send us. Or, call us on a phone.
