Sanwa Hydrotech Corporation develops, manufactures and sells process pumps including metallic seal-less magnet drive pumps, multi functional pumps for slurry application.
Home » Product information » Stainless steel magnet drive pump » Magnet pump for high density slurry MDS
Stainless steel magnet drive pump
For high density slurryMagnet pump for high density slurryNEW
Close-coupled pump
- Handles high density slurry liquid (solid grains).
- Thanks to the filtering effect of the discharge separator, the pump can transfer liquids containing granular material with diameters of 1 to 2mm, 30wt%
- Neither external flushing nor bearing monitoring is necessary. Highly durabe.
- The series covers wide capacity range 2.2 to 22 kW motor capacity.
- The magnet drive is perfectly supported as the SiC-D bearing is used as standard.
- Easy to disassemble and reassemble.
Features
The separator can be disassembled by itself.
The separator can be removed by unscrewing and removing the mounting bolts, without removing the pump housing from the base. Only element can be replaced if it is stuck by slurry, is damaged, or becomes worn.
Specifications
Product specification
| Pump Type | MDS  |
|
|---|---|---|
| Frequency（Hz） | 50 | 60 |
| Maximum total head（m） | 80 | 85 |
| Max. capacity （L/min） |
1600 | 1200 |
| Maximum operating temperature（℃） | 150 | |
| Minimum operating temperature（℃） | -30 | |
| Liquid maximum specific gravity | 2 | |
| Liquid maximum viscosity （mPa・s,cP） |
300 | |
| Design pressure（MPaG） | 1.0（221,420）,1.6 | |
| Bore [Suction x Discharge]（mm） |
25×20 to 100×80 | |
| Pipe connection (Flange standard) |
JIS 10K RF ASME 150LB RF |
|
| Impeller type | open | |
| Motor output | 1.5 to 22kW | |
| (Synchronized) rotation speed（rpm） | 1500,1800,3000,3600 | |
| Pump material | SCS14(SUS316) | |
Selection table
Expanded the selection range
Inquiry for product and service
For more details about our products and service, please fill in the form below and send us. Or, call us on a phone.
